Clik here to view.
Re: Operation Failed Timed out waiting for VMware Tools after 300 seconds -...
Hi,you can change the VM Tools timeout per VM from the VM Recovery Properties. You can find more info in the documentation (Configure Virtual Machine Startup and Shutdown Options ). Hope this...
View ArticleDuplicate IP Address
Hi All, I have an odd issue with my SRM virtual appliance v8.3.1. It's been running for a month already without any issues when suddenly it lost network connectivity. I did spend a lot of time...
View ArticleRe: Duplicate IP Address
Hi chrischay, Please try disabling the network on SRM appliance VM. Initiate a ping to see if you get a reply from another device/VM in the environment.Share screenshot/log snippet where it reported...
View ArticleRe: Duplicate IP Address
Hi Ashilkrishan, I've done it already. Disabled eth0 and try pinging the IP address and nothing replies. That's why I'm pretty sure there is no duplicate. I attach an image of the error. Thanks
View ArticleClik here to view.
Re: Duplicate IP Address
That's strange. Please try the following: 1. Go to edit settings of SRM VM and uncheck the network adapter2. Power off SRM appliance --> Enable the network adapter from edit settings and power it on...
View ArticleRe: SRM array based Multi site Configuration with array pair recoverpoint sra
Hello,I just installed SRM VM for each recoverpoint and storage, and noticed that only one array pairing is possible.According to the attached picture i can't paired another unity(601;602;603) with the...
View ArticleSRM+vSphere Replication+Reprotect takes long time
Hello This is the scenario, vSphere Replication to replicate VMs from site A to B, VMs protected with SRM and one VM is bigWhen a recovery plan is executed site B becomes the protected site, then we...
View ArticleRe: SRM+vSphere Replication+Reprotect takes long time
Hi JoaquinC, Re-protect with vSphere replication is expected to take time as it has to perform checksum operations. It takes time because VR has to read the entire disk for change in data blocks and...
View ArticleClik here to view.
SRM and GPUs
Hi,is it possible to protect using SRM, VMs that are using a Nvidia M60 GPU ?
View ArticleRe: SRM and GPUs
By the way, may I ask what use case this is for? And out of interest, would those GPU resources be sitting idle in the DR site?
View ArticleRe: SRM and GPUs
How is the GPU exposed to the VM?vGPU?Passthrough?Assignable Hardware? I have never seen a statement around this, I will reach out to the PM/Eng team, but I would assume that it would work with...
View ArticleRe: SRM+vSphere Replication+Reprotect takes long time
Hi Ashilkrishnan Thanks for replying, you helped me last time to understand why reprotect takes time so I was trying to not give the focus to process. My question is more related to what can I do if I...
View ArticleRe: SRM+vSphere Replication+Reprotect takes long time
Nice to hear from you again. Once you perform a recovery, these VMs are no longer protected. At this stage, both planned migration/disaster recovery is not an option and a re-protect is required. If...
View ArticleClik here to view.
Re: SRM array based Multi site Configuration with array pair recoverpoint sra
You need to end up with 3 separate pairs of SRM servers, 1 each for the 3 arrays. Then you install the SRA on each and create array-pairs separately on each one. See the documentation: Installing Site...
View ArticleClik here to view.
Re: SRM+vSphere Replication+Reprotect takes long time
I ended up opening a case and I got the same answer, basically its no possible to run a recovery plan until all the VMs finish their initial sync.They only workaround as you correctly mentioned is to...
View ArticleRe: Site Recovery Manager Appliance 8.2 install/configuration
Hy i have the same problem, i have no password with space but i have reinstall many time but the problem is always the same. please help me.I have vsphere replication appliance 8.2.0 installed in both...
View ArticleRe: Site Recovery Manager Appliance 8.2 install/configuration
Moderator: Thread moved to the SRM area.
View ArticleRe: Site Recovery Manager Appliance 8.2 install/configuration
Hi, Please check if you are able to login to SRM VM console. If yes, please check drconfigui logs at /var/log/vmware/srm/ /var/log/vmware/drconfig to see if it provides more information
View ArticleRe: Site Recovery Manager Appliance 8.2 install/configuration
Thanks for your answer. Yes i log in srm vm console. but the log file report the same respons. whats i must see in specific in log file?thenks
View ArticleSRM 8.2 - PSC HA VIP on VVD is supported?
Hello folks, My doubt is quite simple, does SRM 8.2 supports to point to a VIP that Load balances two PSC in vSphere 6.7? Or is it needed to point to an specific PSC? I know this was not supported in...
View Article